MM-4XPD Loa Treo liền công suất Meyer Sound
Tính năng nổi bật
ACOUSTICAL1 |
|
Operating Frequency Range2 |
120 Hz – 18 kHz |
Frequency Response3 |
135 Hz – 17 kHz ±4 dB |
Phase Response |
330 Hz – 20 kHz ±45° |
Linear Peak SPL4 |
111.5 dB (M-noise), 109 dB (Pink noise), 111 dB (B‑noise) |
COVERAGE |
|
|
Hypercardioid response with <10 dB front‑to‑back ratio up to 500 Hz 120° (500 Hz – 4 kHz); 80° (4 kHz – 10 kHz ±10°) |
TRANSDUCERS |
|
|
One 4‑inch cone driver; 4 Ω nominal impedance |
AUDIO INPUT |
|
Type |
Differential, electronically balanced |
Maximum Common Mode Range |
±5 V DC |
Connectors |
SwitchCraft EN3 5‑pin male ( two pins for 48 V DC power, three pins for balanced audio) |
Input Impedance |
10 kΩ electronically balanced |
Wiring |
Pin 1: DC power (–) Pin 2: DC power (+) Pin 3: Audio shield, chassis/earth Pin 4: Audio (–) Pin 5: Audio (+) |
Nominal Input Sensitivity |
–2.5 dBV (0.75 V rms) continuous average is typically the onset of limiting for noise and music |
Input Level |
Audio source must be capable of producing +16 dBV (6.3 V rms) into 600 Ω to produce maximum peak SPL over the operating bandwidth of the loudspeaker |
AMPLIFIER |
|
Type |
Class‑D |
Total Output Power5 |
440 W peak |
THD, IM, TIM |
< 0.02% |
Cooling |
Convection |
AC POWER6 |
|
Connector |
SwitchCraft EN3 5‑pin male (two pins for 48 V DC power, three pins for balanced audio) |
Safety Agency Rated Voltage Range7 |
48 V DC |
CURRENT DRAW |
|
Idle Current |
0.16 A rms |
Maximum Long‑Term Continuous Current (>10 sec) |
0.7 A rms |
Burst Current (<1 sec) |
2.2 A rms |
Maximum Instantaneous Peak Current |
2.35 A peak |
Inrush Current |
<7.0 A peak |
PHYSICAL |
|
Dimensions |
W: 4.04 in (103 mm) x H: 4.04 in (103 mm) x D: 7.95 in (202 mm) D with connector: 10.20 in (259 mm) |
Weight |
5.2 lb (2.4 kg) |
Enclosure |
Extruded aluminum with black anodized finish |
Protective Grille |
Perforated steel |
Mounting |
Two 3/8 in‑16 side inserts; optional MUB‑MM4XPD U‑bracket |